Further information on the applicable conditions as well as a standard withdrawal form are available in this section

The most common materials to be used to re-enforce a pump is PTFE and ETFE polymers. Please feel free to liên hệ us for any problems or problems with resin hoses and fittings! In case you have to use your fittings other than our original fittings, due to the laminated structure tubing, please use the joints to seal an inner surface of the tubing. Please do not use the joints to seal an outer surface of the tubing.

Reichelt Chemietechnik is globally present and authorizes several companies to distribute its products in other countries. Our terms and conditions shall constitute the entire agreement for the sale of products to customers. By buying any of our products, you are accepting and agreeing to our terms and conditions. Any varying, differing or additional terms and conditions by customers do not apply unless previously and explicitly accepted by RCT Reichelt Chemietechnik GmbH + Co. The tensile strength of ETFE can be as much as 38% greater than PTFE, meaning ETFE material can be subjected to harsher operating conditions than its counterpart. This is why most chemical pumps are supplied in ETFE as it is a stronger material for the injection moulding process they go through.

【High Performance and Handy Power Source】DELTA is a portable power station with 1260Wh,which to meet different kinds of electricity demands outdoor usage for trang chính, travel, camping, backseat on long road trips. 【BLUETTI AC50S Power Station】500Wh/300W Portable power station with a wide 14V-40V,Max 120W, 10A Max. Solar Input, MPPT, allowing recharge from AC wall outlet and solar panel.

China fep tubes

After stretching, this material remains abrasion-resistant and waterproof, but the tiny pores created by the stretching mean that the material breathes, too. ETFE, or ethylene tetrafluoroethylene, consists of carbon, fluorine and hydrogen, has a higher tensile strength than PTFE, though PTFE will stretch before breaking. It is also more heat resistant, melting at 327°C, which is 60°C more than ETFE. PTFE is far harder to burn, as it requires a higher concentration of ambient oxygen. It is designed by HAKKO tubing products, so you do not have to worry about fluid leakages and coming off. Flame Resistant – ETFE tubing can withstand temperatures up to 150°C.

Of the major fluorine-based plastic tubes, ETFE tubing is arguably the strongest, with drawbacks in flexibility as a result. ETFE tubing has a higher melting point than comparable varieties, as well as greater weather resistance. This tubing has exceptional resistance to high temperatures, chemical reaction, corrosion, and stress-cracking. The mechanical toughness and electrical and low-friction properties of ETFE tubing make it the preferred plastic for a host of applications and different processing techniques. Ethylene tetrafluoroethylene, or ETFE, is a copolymer of ethylene and tetrafluoroethylene .

If you use this website, various pieces of personal data will be collected. This privacy policy explains which information is being collected and for what purpose. Our online cửa hàng offers several different payment options for private, commercial and scholastic customers.

ETFE’s toughness allows it to stand up to high levels of mechanical stress including burst, cracking, and crushing in a wide range of environments. Custom Profiles– We excel in the production of tight-tolerance custom profiles and special shapes for our extruded products. Our ETFE tubing modifications include special profiles, splines, and many other unique shapes which you tell us that you need. Engineered surfaces can be applied to the inner, outer, or both diameters of the tubing.

Leave a Reply

Your email address will not be published.